12:22 AM | APPTC, C_DAC., CIPET Campus-II, PG Diploma Programmes at DOEACC Centre Calicut, SIBM Pune
ADMISSION IN TO PG DIPLOMA PROGRAMMES AT DOEACC CENTRE, CALICUT.
DOEACC Centre Calicut invites applications from eligible candidates for admission in to the following courses
1. Advanced Course in .NET Technologies (SW302)
2. Advanced Diploma in Mobile Application Development using J2ME (SW303).
The candidates who have a certificate of BE, B.Tech, M.Sc. (CS / IT / Electronics), MCA, others with enough experiences are eligible for this course.
The candidates can pursue these online courses, parallel to their study / work from their home office.
Further Details an be available from:
DOEACC Centre, Calicut [now NIELIT]
PB No 5, NIT Campus PO, Calicut-673601,
E-mail: trng@doeacccalicut.ac.in,
Ph. 0495 2287266, 2287179,
Or can be downloaded from
http://www.doeacccalicut.ac.in
ADMISSION IN TO SUMMER TRAINING COURSES AT CIPET CAMPUS-II.
CIPET Campus-II invites application from eligible candidates for admission in to the following Job Oriented Courses;
1. CIPET Certified Advanced Hardware & Networking Professionals (CCAHNP) / Advanced Machine Maintenance and Industrial Automation: The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 9437496911.
2. CCNA- CISCO Certified Network Associate / Computer Hardware & Networking: The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 9937419762.
3. Advanced VLSI Design / VLSI (Very Large Scale Integration): The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 7377241060.
4. PLC (Programmable Logic Control): The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 9861091836.
5. Master Programme in CAD / CAM (MPCC): The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 9337143007.
6. CNC Machining with CAM Software: The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 9853850087.
7. Hydraulics & Pneumatics: The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 9437014942
8. Advanced Electrical Maintenance with CAD Exposure: The candidates who have a Diploma / ITI (Elect.) certificate can apply for this course. For more information of this course contact on 9658093766.
9. Advanced Machine with CNC & CAD / CAM (AMCC): The candidates who have a Diploma / ITI certificate can apply for this course. For more information of this course contact on 9853850087.
10. Plastic Product Manufacturing Techniques & Quality Control (PPMT&C): The candidates who have a Diploma / +3 Science certificate can apply for this course. For more information of this course contact on 9437014942.
11. Plastic Processing Operator: The candidates who have an ITI / 10th / above certificate can apply for this course. For more information of this course contact on 9437014942.
12. Basic machine with Welding & Fabrication: The candidates who have an ITI / 10th / above certificate can apply for this course. For more information of this course contact on 9776720647.
13. Advanced Welding Technology: The candidates who have an ITI (Welder) / 8th certificate can apply for this course. For more information of this course contact on 9238579516
14. CAD / CAM Courses: The candidates who have an Engg. Degree / Diploma / ITI certificate can apply for this course. For more information of this course contact on 9776720647/ 9337143007. ( AutoCAD / AutoCAD with Project / Unigraphics / Pro-E / CATIA / ANSYS / Master CAM)
Further details can be available from:
Central Institute of Plastics Engineering & Technology,
Shed No. S-3/79, Sector-A, Zone-B,
Mancheswar Industrial Estate, Bhubaneswar-751010,
Ph. 0674-2588203,
Email: cipetsat@gmail.com,
Or can be downloaded from:
http://www.cipet.gov.in
ADVANCED PLASTICS PROCESSING TECHNOLOGY CENTRE (APPTC).
Advanced Plastics Processing Technology Centre invites applications from eligible candidates for admission in to Plastic Processing Operator- Advanced Injection Moulding (PPO – AIM).
APPTC will provide placement assistance in the plastic and allied industries after successful completion of the course.
The candidates who have completed 10th / ITI with minimum of 40% of marks and who have maximum of 30 years can apply for this course. The selection procedure will be held on the basis of first come first serve.
Last date of submission of application form is 5th December, 2011.
Further details can be available from:
Advanced Plastics Processing Technology Centre (APPTC),
Sr. Project Officer,
S-1/25, Industrial Estate, Balasore,
Ph: 06782-653213,
Email: apptcbls@gmail.com
(M) 7735846844 – Ms. Mrunmayee Parua,
(M) 9692318041 – Dr. Samal,
Or can be downloaded from;
http://www.cipet.gov.in.
ADMISSION IN TO SYMBIOSIS INSTITUTE OF BUSINESS MANAGEMENT (SIBM), PUNE.
Symbiosis Institute of Business Management, Symbiosis International University invites applications from eligible candidates for admission in to two years full-time Master of Business Administration (MBA) in Marketing / Finance / Human Resource / operations.
Any Graduation completed or appeared from any statutory university with a minimum of 50% marks (45% for SC/ST) is eligible for this course. Last date for submission of application form is 15th December, 2011.
SIBM shall take a SNAP (Symbiosis National Aptitude Test) of the candidate for admission, for which the candidate will register with SNAP within 23rd November, 2011.
Further details can be available from:
Symbiosis Institute of Buniess Management, pune,
Constituent of Symbiosis International University,
Symbiosis Knowledge Village,
Gram: Lavale, Tal: Mulshi, Pune -412 115,
Tel: 020 39116000 / 7 / 8 / 9 / 10,
E-mail: sibm@sibm.edu
Or can be downloaded from:
http://www.sibm.edu or http://www.snaptest.org (for SNAP registration)
ADMISSION IN TO CENTRE FOR DEVELOPMENT OF ADVANCED COMPUTING (C-DAC).
Centre for Development of Advanced Computing (C-DAC) invites application from eligible candidates for Common Entrance Test (CET) for admission in to the following courses:
1. Diploma in Embedded Systems Design (DESD).
2. Diploma in System Software Development (DSSD).
3. Diploma in Advanced Business Computing (DABC).
The candidates who have a certificate of Engineering Degree (UG / PG) in Electronics / Electrical / Electronics & Communication / Electronics & Instrumentation / Computer Science & Engineering / Computer Engineering / Information Technology or MCA or M.Sc. Computers / Electronics / M.Sc. Instrumentation with higher second class (55% and above) in the final degree are eligible these courses (For course wise eligibility refer website).
Last date for submission of application form is 10th January, 2012.
Further details can be available from:
Centre for Development of Advanced Computing (C-DAC),
#1 Shivabagh, Nalanda Building, Ameerpet, Hyderabad – 500016,
Ph. +91-40-23737124 / 25, Fax: +91-40-23743382,
Or can be downloaded from:
http://www.cdac.in
http://www.cdachyd.in
Regards
Dr. Pragatika Mishra
Editor-cum-Chief Executive
e-News Letter- OrissaJob.Com
Want to refer any of your colleague/friends to subscribe our News Letter on Education & Career and Jobs, please ask him/her to visit http://www.Orissajob.Com and submit their e-mail address in the RSS feed column in the right hand side. Or Subscribe directly at http://Orissajob.Blogspot.Com
Dr. Pragatika Mishra
Editor-cum-Chief Executive
e-News Letter- OrissaJob.Com
…::::::…… OrissaJob.Com- The Only Job & Career Portal Promoted, Managed & Run by Females Only.
DOEACC Centre Calicut invites applications from eligible candidates for admission in to the following courses
1. Advanced Course in .NET Technologies (SW302)
2. Advanced Diploma in Mobile Application Development using J2ME (SW303).
The candidates who have a certificate of BE, B.Tech, M.Sc. (CS / IT / Electronics), MCA, others with enough experiences are eligible for this course.
The candidates can pursue these online courses, parallel to their study / work from their home office.
Further Details an be available from:
DOEACC Centre, Calicut [now NIELIT]
PB No 5, NIT Campus PO, Calicut-673601,
E-mail: trng@doeacccalicut.ac.in,
Ph. 0495 2287266, 2287179,
Or can be downloaded from
http://www.doeacccalicut.ac.in
ADMISSION IN TO SUMMER TRAINING COURSES AT CIPET CAMPUS-II.
CIPET Campus-II invites application from eligible candidates for admission in to the following Job Oriented Courses;
1. CIPET Certified Advanced Hardware & Networking Professionals (CCAHNP) / Advanced Machine Maintenance and Industrial Automation: The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 9437496911.
2. CCNA- CISCO Certified Network Associate / Computer Hardware & Networking: The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 9937419762.
3. Advanced VLSI Design / VLSI (Very Large Scale Integration): The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 7377241060.
4. PLC (Programmable Logic Control): The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 9861091836.
5. Master Programme in CAD / CAM (MPCC): The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 9337143007.
6. CNC Machining with CAM Software: The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 9853850087.
7. Hydraulics & Pneumatics: The candidates who have an Engg. Deg. / Diploma certificate can apply for this course. For more information of this course contact on 9437014942
8. Advanced Electrical Maintenance with CAD Exposure: The candidates who have a Diploma / ITI (Elect.) certificate can apply for this course. For more information of this course contact on 9658093766.
9. Advanced Machine with CNC & CAD / CAM (AMCC): The candidates who have a Diploma / ITI certificate can apply for this course. For more information of this course contact on 9853850087.
10. Plastic Product Manufacturing Techniques & Quality Control (PPMT&C): The candidates who have a Diploma / +3 Science certificate can apply for this course. For more information of this course contact on 9437014942.
11. Plastic Processing Operator: The candidates who have an ITI / 10th / above certificate can apply for this course. For more information of this course contact on 9437014942.
12. Basic machine with Welding & Fabrication: The candidates who have an ITI / 10th / above certificate can apply for this course. For more information of this course contact on 9776720647.
13. Advanced Welding Technology: The candidates who have an ITI (Welder) / 8th certificate can apply for this course. For more information of this course contact on 9238579516
14. CAD / CAM Courses: The candidates who have an Engg. Degree / Diploma / ITI certificate can apply for this course. For more information of this course contact on 9776720647/ 9337143007. ( AutoCAD / AutoCAD with Project / Unigraphics / Pro-E / CATIA / ANSYS / Master CAM)
Further details can be available from:
Central Institute of Plastics Engineering & Technology,
Shed No. S-3/79, Sector-A, Zone-B,
Mancheswar Industrial Estate, Bhubaneswar-751010,
Ph. 0674-2588203,
Email: cipetsat@gmail.com,
Or can be downloaded from:
http://www.cipet.gov.in
ADVANCED PLASTICS PROCESSING TECHNOLOGY CENTRE (APPTC).
Advanced Plastics Processing Technology Centre invites applications from eligible candidates for admission in to Plastic Processing Operator- Advanced Injection Moulding (PPO – AIM).
APPTC will provide placement assistance in the plastic and allied industries after successful completion of the course.
The candidates who have completed 10th / ITI with minimum of 40% of marks and who have maximum of 30 years can apply for this course. The selection procedure will be held on the basis of first come first serve.
Last date of submission of application form is 5th December, 2011.
Further details can be available from:
Advanced Plastics Processing Technology Centre (APPTC),
Sr. Project Officer,
S-1/25, Industrial Estate, Balasore,
Ph: 06782-653213,
Email: apptcbls@gmail.com
(M) 7735846844 – Ms. Mrunmayee Parua,
(M) 9692318041 – Dr. Samal,
Or can be downloaded from;
http://www.cipet.gov.in.
ADMISSION IN TO SYMBIOSIS INSTITUTE OF BUSINESS MANAGEMENT (SIBM), PUNE.
Symbiosis Institute of Business Management, Symbiosis International University invites applications from eligible candidates for admission in to two years full-time Master of Business Administration (MBA) in Marketing / Finance / Human Resource / operations.
Any Graduation completed or appeared from any statutory university with a minimum of 50% marks (45% for SC/ST) is eligible for this course. Last date for submission of application form is 15th December, 2011.
SIBM shall take a SNAP (Symbiosis National Aptitude Test) of the candidate for admission, for which the candidate will register with SNAP within 23rd November, 2011.
Further details can be available from:
Symbiosis Institute of Buniess Management, pune,
Constituent of Symbiosis International University,
Symbiosis Knowledge Village,
Gram: Lavale, Tal: Mulshi, Pune -412 115,
Tel: 020 39116000 / 7 / 8 / 9 / 10,
E-mail: sibm@sibm.edu
Or can be downloaded from:
http://www.sibm.edu or http://www.snaptest.org (for SNAP registration)
ADMISSION IN TO CENTRE FOR DEVELOPMENT OF ADVANCED COMPUTING (C-DAC).
Centre for Development of Advanced Computing (C-DAC) invites application from eligible candidates for Common Entrance Test (CET) for admission in to the following courses:
1. Diploma in Embedded Systems Design (DESD).
2. Diploma in System Software Development (DSSD).
3. Diploma in Advanced Business Computing (DABC).
The candidates who have a certificate of Engineering Degree (UG / PG) in Electronics / Electrical / Electronics & Communication / Electronics & Instrumentation / Computer Science & Engineering / Computer Engineering / Information Technology or MCA or M.Sc. Computers / Electronics / M.Sc. Instrumentation with higher second class (55% and above) in the final degree are eligible these courses (For course wise eligibility refer website).
Last date for submission of application form is 10th January, 2012.
Further details can be available from:
Centre for Development of Advanced Computing (C-DAC),
#1 Shivabagh, Nalanda Building, Ameerpet, Hyderabad – 500016,
Ph. +91-40-23737124 / 25, Fax: +91-40-23743382,
Or can be downloaded from:
http://www.cdac.in
http://www.cdachyd.in
Regards
Dr. Pragatika Mishra
Editor-cum-Chief Executive
e-News Letter- OrissaJob.Com
Want to refer any of your colleague/friends to subscribe our News Letter on Education & Career and Jobs, please ask him/her to visit http://www.Orissajob.Com and submit their e-mail address in the RSS feed column in the right hand side. Or Subscribe directly at http://Orissajob.Blogspot.Com
Dr. Pragatika Mishra
Editor-cum-Chief Executive
e-News Letter- OrissaJob.Com
…::::::…… OrissaJob.Com- The Only Job & Career Portal Promoted, Managed & Run by Females Only.
Posts
