Saturday, March 24, 2012

Institute for Social and Economic Change, IIT Roorkee, Central Institute of Plastics Engineering & Technology, Acharya Nagarjuna University, CTTC

12:49 AM | , , , ,

INSTITUTE FOR SOCIAL AND ECONOMIC CHANGE, BANGALORE.

Institute for Social and Economic Change, Bangalore invites application for admission in to Doctoral Research Programme 2012-13 in Agricultural Economics or Rural Development, Development Studies, Economics, Education, Environmental Economics / Ecological Economics / Natural Resource Economics, Political Science / International Relations / Public Administration, Population / Demographic Studies, Sociology / Social Anthropology.

The candidates of Master’s Degree or equivalent in any of the above disciplines at least 55% marks in aggregate (50% for SC / ST), A pass in UGC-NET or JRF or SLET or M.Phil are eligible to apply the application. Age limit for ICSSR fellowship is below 35 years, 40years in case of Teachers and members of Professional Staff in Research Institutes. There is no age bar for ISEC and Part time Ph.D. candidates.

The candidates selected for ICSSR / ISEC fellowship are paid a scholarship of Rs. 6,000 PM. During the PhD Foundation Coursework period beside an annual contingency grant of Rs/- 12, 000. Upon successful completion of PhD Coursework the fellowship is extendable to a contingency of Rs. 10,000/-per annum. During the third year, the Fellowship payable will be Rs. 18,000/-PM and the annual contingency will be Rs. 20, 500/-.

The selection procedure will be held on the basis of the quality of their research proposal. The short listed candidates will be called for written test and the result will displayed in the website http://www.isec.ac.in on or before 15th June, 2012. Qualifying candidates will appear a PI on 13th July, 2012.

The last date of submission of application form with requisite attachments is on or before 15th May, 2012.

Further details will available from:

The Registrar, Institute for Social and Economic Change,
Professor V K R V Rao Road, NAgarabhavi P.O.,
 Bangalore – 560 072,
Karnataka, India,
Email: phd@isec.ac.in,
Ph: 080-23217013, 080-23215519; Ext. 113,

Or can be downloaded from:
http://www.isec.ac.in/phd-advt-2012.htm.

PH.D. & POST DOCTORAL PROGRAMMES AT INDIAN INSTITUTE OF TECHNOLOGY ROORKEE.

Applications are invited from GATE qualified candidates for admission to the Postgraduate Programmes leading to M.Tech / M.Arch / M.U.R.P. for the session 2012-2013.

IIT Graduates (Direct) without GATE (Having CGPA of 8.00 on 10 point scale) and sponsored candidates are also eligible to apply. The candidates can apply it in online by registering in the following website: http://pgadm.iitr.ernet.in.

Reservation of seats for different categories shall be as per Govt. of India rules. Last date for submission of application form is on or before 25th April, 2012.

Further details can be available from:

The Chairman,
PG Admissions Office,
Indian Institute of Technology Roorkee,
Roorkee-247667, Uttarakhand,
Ph: 01332-284010 / 285875,

Or can be downloaded from:
http://www.iitr.ernet.in

ADMISSION IN TO CENTRAL INSTITUTE OF PLASTICS ENGINEERING & TECHNOLOGY (CIPET).

Central Institute of Plastics Engineering & Technology invites application from eligible candidates for admission in to M.Tech. in following disciplines;
1.    M.Tech in Plastic Engineering: Candidates from B.Tech in Mechanical Engineering / Chemical Engineerng / Production Engineering / Polymer / Plastic Engineering / Technology or M.Sc. in Polymer Science / Chemistry with Polymer Specialization with 50% marks (45% in case SC / ST) are eligible to apply.
2.    M.Tech in Polymer Nanotechnology: Candidates from B.Tech in Mechanical Engineering / Chemical Engineerng / Polymer / Plastic Engineering / Technology or M.Sc. in Polymer Chemistry / Physics / Chemistry with Polymer Specialization with 50% marks (45% in case SC / ST) are eligible to apply.
Interested candidates can apply through online  or by post to Chairman, OJEE-2012. Last date for online registration is 15th March, 2012 and for submission to completed application form to OJEE is 22nd March, 2012.
 
Further details can be available from:

Central Institute of Plastics Engineering & Technology (CIPET),
B-25, CNI Complex, Patia, Bhubaneswar – 751024,
Ph. 0674-2742029 / 2743462 / 2744607,
Fax: 0674-2743863
Email: cipetbbsr@gmail.com,

Or can be downloaded from:
http://www.ojee.nic.in or http://www.cipet.gov.in.

POST GRADUATE DEGREE IN ACHARYA NAGARJUNA UNIVERSITY.

Acharya Nagarjuna University invites applications from eligible candidates who have passed or appearing for the final year examination in the qualifying degree for admission into PG courses in M.Sc., MA, MSW, M.Com., MHRM, MTTM, M.Ed., M.P.Ed., MBA (Hospital Administration), PGDAS, PG Diploma in Yoga, 5 years Integrated Courses in MBA and Nanotechnology for the academic year 2012-2013.

Application forms with information Brochure can be had from: 1. The Directo, Directorate of Admissions, ANU. 2. ANU PG Centre, Ongole. 3. CSR Sarma College, Ongole, 4. Govt Degree College for Women, 5. All PG Colleges affiliated to ANU, 6. Gate Degree College, Tirupati, 7. Sri Vijaya Durga Degree College, Kurnool, 8. PB Siddhartha PG College, Vijayawada, 9. Andhra Kesari Centenary Jr. College, Rajahmundry, 10. MSRS Siddhartha Degree & PG College, Visakhapatnam, 11. MPR Law College, Srikakulam and 12. Sri Nagarjuna Degree College, SR Nagar Hyderabad.

Last date for submission of application form is 11th April, 2012 and the date of late fee is 21st April, 2012. Schedule of PG Entrance Test will held on 5th May, 2012.

Further Details will available from:
Dr. G. Rosaiah, Director I/C,
Directorate of Admissions,
Acharya Nagarjuna University,
Ph: 0863-2346171 / 138, 2293263, 440258822 / 9440258811,

Or can be downloaded from:
http://www.anu.ac.in.

ADMISSION IN TO CENTRAL TOOL ROOM & TRAINING CENTRE (CTTC).

Central Tool Room & Training Centre (CTTC) invites application from eligible candidates for admission in to the following Programs;
1.    Certificate Courses in CNC Machining (One Year): The candidates from ITI pass out in the Trade of Machinist / Turner will join this course. 20% theory and 80% practical on CNC Fundamentals, CNC Milling Operations and Programming, CNC Turning and Operations and Programming, EDM & WEDM, Master CAM were Provide.
2.    Certificate course in CNC Programming & Practices:  The candidates from+2 pass/ ITI Fitter or equivalent will join this course. The Course Content 20% theory & 80% Practical on Fitting / Bench Work, Conventional Lathe, Conventional Milling, Conventional Grinding, CNC Lathe & CNC Milling Programming and Practices, Auto CAD & On-job Training, Master CAM.

The selection procedure will held on the basis of first come first serve for both the courses.

Further Details can be available from:

Central Tool Room & Training Centre,
(Ministry of Micro, Small & Medium Enterprises, Govt. of India)
B-36, Chandaka Industrial Area, Bhubaneswar-751024,
Ph. No. 0674- 3011733, 3011734,
Fax: 0674-3011750,
E-mail: cttc@satyam.net.in,

Regards

Dr. Pragatika Mishra
Editor-cum-Chief Executive
e-News Letter- OrissaJob.Com

Want to refer any of your colleague/friends to subscribe our News Letter on Education & Career and Jobs, please ask him/her to visit http://www.Orissajob.Com and submit their e-mail address in the RSS feed column in the right hand side.  Or Subscribe directly at http://Orissajob.Blogspot.Com

Dr. Pragatika Mishra
Editor-cum-Chief Executive
e-News Letter- OrissaJob.Com

…::::::…… OrissaJob.Com- The Only Job & Career Portal Promoted, Managed & Run by Females Only.